Advertisement
To assembleand connectthe AM loopantenna
To assemble
the AM loop antenna
To connectthe AV COIVlPU LINKcords
This system
allows
you to use JVC's
TV with simple
operations;
by starting
playing
back a disc, the TV
automatically
turns on arrd changes
the irrput mode to tire
appropriate
position
so that you cart view' the playback
picture.
To use AV COMPU
LINK,
you need to connect
the System
arrd the TV by using a cord with monaural
mini-plugs
(not
supplied)
in addition
to the video irrput/output
connection
through
the COMPONENT
jacks, S-VIDEO
jack or VIDEO
(composite)
jack on the rear.
To connect the AM loop antenna
(i) Hold
@ Insert
• If the AM loop antenna
wire or speaker
cords are covered
with vinyl, remove
the vinyl to expose
the tip of the
arrtenna by twisting
the vinyl.
• Make sure the antenna
conductors
do not touch any other
terminals,
connecting
cords arrd power cord. Also, keep the
arrtennas away from metallic
parts of the System,
connecting
cords, arrd the AC power cord. This could cause
poor reception.
To connect
the speaker
cords
Connect
the right speaker
to the RIGHT
terminals,
and tire
left speaker
to the LEFT terminals.
@ Open
@ Insert
@ Close
When connecting
tire speaker
cords, match the polarity
of
the speaker
terminals:
• For LOW terminals:
Red cord to (+) and black cord m (-).
For HIGH terminals:
Grey cord to (+) arrd blue cord to (-).
iiiii
iiiii
iiiii
iiiii
• DO NOT allow the conductor
of the speaker
cords to be in touch with the metallic
parts of
the System.
To connect digital audio
BeR)re connecting
optical
digital cord, remove
the
protective
cap from the DVD OPTICAL
DIGITAL
OUT terminal.
6ha_gi88 t_e iS#a_ai:88 N0
)
This System
supports
progressive
scanning.
If you connect
a progressive
TV through
the COMPONENT
jacks, you can enjoy a high quality
picture
from the built-in
DVD player
by selecting
"PROGRE."
PROGRESSIVE
PROGRE----]
INTER
(at the same time)
PROGRE
Progressive
scanning.
For a progressive
TV.
INTER
Interlaced
scanning.
For a conventional
TV.
6
Advertisement
