Brightness Adjustment Of The Display; Grip Adjustment; Tripod Mounting - JVC GZ-MG30U Instructions Manual

GETTINGSTARTED
EN 19
I Brightness A djustment o f the
Display
The brightness of the display can be adjusted.
1 Set the power switch to __'i or i • while
pressing down the lock button located on the
switch.
2 Open the LCD monitor fully. ( pg. 9)
3 Press MENU. The menu screen appears.
4 Press A/v to select [DISPLAY], then press
I_11.
5 Press ^/v to select
[BRIGHT], and press I_11.
The brightness control
indicator appears.
6 Press < / _ until the appropriate brightness
is reached.
7 Press 1_11 to clear the brightness control
indicator from the display.
II GripAdjustment
1 Adjust the velcro strip.
Pass your right hand
through the loop and grasp
the grip.
3 Adjust your thumb and
fingers through the grip to
easily operate the
recording start/stop button,
power switch and zoom
lever. Be sure to fasten the
velcro strip to your
preference.
II Tripod Mounting
To attach the camera to a
tripod, align the direction
stud and screw to the
mounting socket and
stud hole on the camera.
Then tighten the screw
clockwise.
• Some tripods are not
equipped with studs.