Brightness Adjustment Of The Display; Grip Adjustment; Tripod Mounting - JVC GZ-MG50E Instructions Manual

Brightness Adjustment of the
Display
The brightness of the display can be adjusted.
1
Set the power switch to
pressing down the lock button located on the
switch.
2
Open the LCD monitor fully. (
3
Press MENU. The menu screen appears.
4
Press / to select [DISPLAY], then press
49.
5
Press / to select
[BRIGHT], and press 49.
The brightness control
indicator appears.
6
Press / until the appropriate brightness
is reached.
7
Press 49 to clear the brightness control
indicator from the display.
1
2
through the loop and grasp
or while
the grip.
3
fingers through the grip to
pg. 9)
easily operate the
recording start/stop button,
power switch and zoom
lever. Be sure to fasten the
velcro strip to your
preference.
To attach the camera to a
tripod, align the direction
stud and screw to the
mounting socket and
stud hole on the camera.
Then tighten the screw
clockwise.
● Some tripods are not
GETTING STARTED

Grip Adjustment

Adjust the velcro strip.
Pass your right hand
Adjust your thumb and

Tripod Mounting

equipped with studs.
19
EN