Direct Printing With A Pictbridge Printer - JVC GZ-MG30U Instructions Manual
Hard disk camcorder
Hide thumbs
Also See for GZ-MG30U:
- Getting started (64 pages) ,
- Instructions for use manual (110 pages) ,
- Instructions manual (64 pages)
Table of Contents
Advertisement
_ DirectPrintingwith a PictBridge
Printer
If your printer
is compatible
with PictBridge,
still
images
can be printed
easily by connecting
the
camera
with the USB cable directly
to the
printer.
DPOF setting
can also be used.
(
pg. 46)
NOTE:
After selecting [DIRECT PRINT] in the menu.
connect the USB cable.
To print by selecting
a still
image
1
Set the power switch
to _.
2
Set the MODE switch
to 0.
3
Press MENU.
The menu screen
appears.
4
Press
/,,/v
to select [DIRECT
PRINT],
then
press I_11. A message
[PLEASE
CONNECT
PRINTER]
appears.
5 Connect
the camera to the printer with the
USB cable.
• After a while, the print menu appears.
6
Press A/v
to select
[SELECTED
PRINT],
then press I_11.
7
Press
< / ), to select
the desired
file, then
press I_11.
8
Press
</>
to set the
number
of prints.
• The number of prints can
be set from 1 to 99.
9
Press A/v
to select
[DATE], then press
</>
to select
[ON] or [OFF].
• Select [ON] to print the date or [OFF] not to print.
1 0 Press
^/v
to select
[PRINT],
then press
I_11. The image is printed.
MANAGING FILE5 EN
47
To cancel
print setting
Press
,,',/v
to select
[CANCEL],
then press
Ii,_ll.
To stop printing
after printing
starts
1
Press I_11. The confirmation
screen
appears.
2
Press
^/v
to select [EXECUTE],
then
press I_11.
To print using the DPOF setting
If the printer is compatible
with DPOE
you can
use the DPOF
setting.
(
pg. 46)
1 Set the power switch to _:.
2
Set the MODE switch
to _.
3
Press MENU.
The menu screen appears.
4
Press
z,,/v
to select
[DIRECT
PRINT], then
press I_11. A message
[PLEASE
CONNECT
PRINTER]
appears.
5
Connect
the camera
to the printer with the
USB cable.
• After a while, the print menu appears.
6
Press
^/v
to select [DPOF
PRINT],
then
press I_11.
7
Press
A/v
to select [PRINT],
then press
o
I_11. The images
are printed.
• To confirmthe
DPOF setting, press /,,/v
to
--_
select [CHECK SETTINGS],
then press I_11.
After that, press MENU to return to the previous
menu.
NOTE:
If the printer is not recognized, or to print again after
direct printing with a PictBridge
printer, remove the
USB cable, select [DIRECT PRINT] in the menu
again, and then reconnect the cable.
Hide quick links:
Advertisement
Table of Contents
