ELECTRONIC OVEN CONTROL
Read the instructions
using the oven,
use of your oven, become familiar with the various
of the oven as described below.
The graphics on your timer may not look exactly like the one shown. This
change the way it operates.
Note: The oven function will not work if the time of day clock is not set.
Up and Down arrow
pads- Used along
ADD 1 MINUTE PAD Used to add 1 minute
pads to select oven
Used to turn
time, start time
Used to set the
of the baking
an automatic start
hght ON and
c[ean time and minute
thenormal baking mode
Broil Pad- Used to
lights- These light I
select the variable
feature is in us_ _q.
Used to set the Keep
Oa art ;
Stop Pad- Used to
Timer Pad- Used to
set or cancel
minute timer does not
start or stop cooking.
Delay Start Pad- Used
to set the desired start
time for baking. Can be
used with BAKE TIME
to program a delayed
Oven, Preheat & Lock lights- The "oven" light indicates
that the oven is functionning. The "Preheat" light will glow
when the oven is first set to operate, or if the desired
temperatu re isreset higher than the actual oven tern perature.
The "Door Locked" light will flash until the door locks when
the serf-clean cycle is in use. It glows constantly after the door
locks (some models).
clear any function
except the time of day
can be programmed
Bake normally, Keep warm, Time Bake,Delayed Timed Bake (delayed start), Broil and Clean.
Note: Push buttons or pads may be shaped differently.
For a silent
When choosing a function, a beep will be heard each time a pad is pushed, ff desired, the controls can be programmed for silent
To te[[ if your oven is set for normal or silent operation push and hold START TIME or DELAY START pad for 7 seconds. "- -" or
"SP" appears in the display. Within B seconds, press the UP or DOWN ARROW pad to switch between normal sound operation
and silent operation mode. The display wi[[ show either "- -" or "SP". Wait 5 seconds to return to normal operating mode.
Note: if "SP" appears, the control wi[[ operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation
The electronic oven control isset to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for
any temperature from I70% to 550% (77°C to 288°C).
To change the temperature
to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
Press and hold BROIL pad for 7 seconds until °F or °C appears in the display.
Press the UP or DOWN ARROW pad to change °F to °C or °C to °F.
Wait 5 seconds to accept the changes or press CLEAR/OFF or STOP pad to accept the changes.