Frigidaire FED365ESC Control Manual
Electronic oven
Hide thumbs
Also See for FED365ESC:
- Wiring diagram (2 pages) ,
- Installation instructions manual (17 pages) ,
- Use & care manual (28 pages)
Table of Contents
Advertisement
Quick Links
Control Pad Functions
Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the
various functions of the oven as described below. Note: The graphics on your timer may not look exactly like those shown.
This doesn't change the way it operates.
Bake Time Pad-
Used to enter the
length of the baking
Clock Pad-
time.
Used to set the
time of day.
Timer Pad- Used
to set or cancel the
minute timer. The
minute timer does
not start or stop
cooking.
Start Time Pad-
Used to set the
desired start time
for baking. Can be
used with BAKE
TIME to program a
delayed bake cycle.
Oven, Preheat & Lock lights- The "oven" light will glow each time the oven
unit turns on maintain the set oven temperature. The "Preheat" light will
glow when the oven is first set to operate, or if the desired temperature is
reset higher than the actual oven temperature. The "Door Locked" light will
flash until the door locks when the self-clean cycle is in use. It glows
constantly after the door locks.
The oven can be programmed to:
Bake normally, Time Bake, Delayed Bake, Broil, Self-Clean
Note: Push buttons or pads may be shaped differently.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent
operation. Push and hold START TIME pad. After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pushed. To return the sound, push and hold START TIME pad again for 7 seconds until 1 beep is heard.
Note: The control will return to the audible mode after a power outage.
Temperature Conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push BROIL pad. "- - - " appears in the display.
2. Push and hold the UP ARROW pad until "HI" appears in the display.
3. Push and hold BROIL pad until °F or °C appears in the display.
4. Push UP or DOWN ARROW pad to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
Printed in United States
ELECTRONIC OVEN CONTROL
Note: The oven function will not work if the time of day clock is not set.
Up and Down arrow pads- Used along with the
function pads to select oven temperature, cooking
time, start time (when programming an automatic bake
time), time of day, clean time and minute timer.
Bake
Clock
time
Start
Timer
On/Off
time
(Fahrenheit / Celsius)
Oven
Preheat
Door Locked
Self-Cleaning Oven
1
Bake
Broil
Clear
Clean
/Off
Controls
Clear Pad- Used to clear any function previously
entered except the time of day and minute timer.
Push Clear pad to stop cooking.
318200184 (0502) Rev. A
Bake Pad- Used to
enter the normal
baking mode
temperature.
Feature indicator
lights- These light
to show which
feature is in use.
Broil Pad- Used to
select the variable
broil function.
Clean Pad- Used to
select the self-
cleaning cycle.
Advertisement
Table of Contents
Related Manuals for Frigidaire FED365ESC
Summary of Contents for Frigidaire FED365ESC
-
Page 1: Electronic Oven Control
Control Pad Functions Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the various functions of the oven as described below. Note: The graphics on your timer may not look exactly like those shown. This doesn't change the way it operates. -
Page 2: Setting The Clock And Minute Timer
Note: The oven function will not work if the time of day clock is not set. To Set the Clock When the range is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash "12:00". 1. Push CLOCK pad. -
Page 3: Setting Oven Controls
Setting Oven Controls Clock Timer On/Off Note: The oven function will not work if the time of day clock is not set. To Set or Change the Temperature for Normal Baking The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C). Note: The oven control has a built-in safety feature that will shut off the oven if the control is left on for more than 11 hours 59 minutes. - Page 4 Setting Oven Controls Bake Clock time Start Timer On/Off time To Broil 1. Arrange oven rack while oven is still cool. 2. Push the BROIL pad. 3. Push and hold the UP or DOWN ARROW pad until the desired broil setting level appears in the display. Push UP ARROW pad for HI broil or the DOWN ARROW pad for LO broil.
- Page 5 Setting Oven Controls Bake Clock time Start Timer On/Off time To Set the Automatic Timer (Timed Bake Feature-If equipped) The BAKE TIME and START TIME controls operate the Timed Bake Feature. The automatic timer will turn the oven on and off at the times you select in advance.
-
Page 6: Oven Cleaning
Note (some range models only): During the self-cleaning, the surface element, when used, are subjected to high heat. To ensure maximum element life, a safe guard locks off the use of the surface elements during the self-clean cycle. Once the oven cleaning cycle is completed and the oven door can be opened, the surface elements can be utilized. -
Page 7: Failure Modes
Recalibrating Your Oven Temperature Recalibrating Your Oven Temperature The temperature in the oven has been set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is higher or lower than recommended temperature. - Page 8 Notes...