Advertisement
install
Side Shelf
Frame
to Firebox
[]
Unscrew
the 2 Phillips Head bolts ¼" from the upper left and right
corner holes in the right side of
the firebox
as shown in Inset
1. The bolts extending
out of the firebox
sides are to attach
the side
shelf frame,
[]
Slide the upper holes of the side shelf frame
over the heads of the 2 Phillips Head Bolts and drop
down.
[]
Use 2 Phillips Head Bolts (M6x16mm)
and 2 Washers
(M6) to attach the lower holes in the side shelf
frame to the firebox
as shown
in Inset
2. Tighten
the upper
bolts after the 2
lower bolts are tight,
[]
Use 2 Phillips Head Bolts (M4x8mm)
and 2 Lock Washers
(M4) to attach the lower holes in the Side
Shelf Front Panel to the firebox.
See Inset
3.
4
Inset 1
_ad
Bolt M6x16mm
Qty: 2
©
Lock Washer:
M6
qty:
2
Phillips
Head Bolt M4x8mm
qty:
2
©
Lock Washer
M4
qty:
2
Inset 2
Inset
3
l_l
Install
the Heat Diffuser,
Cooking
Grates,
Warming
Rack.
[]
Place the Heat Diffuser
into the firebox
between
the ridges in the front and back panels.
See Inset
1.
[]
Place the Cooking
Grates into the firebox.
The grate
bottoms
have a small knob on each corner.
See Inset 2.
[]
Insert
the Warming
Rack into the holes of firebox
side panels
as shown.
See Inset 3.
Inset 1
Inset 3
Inset
2
16
Advertisement
