Advertisement
SERVICE AND ADJUSTMENTS
ATTACH MOWER SIDE SUSPENSION ARMS (A) TO
Insert end of link (E) into hole in front mower bracket
CHASSIS - Position hole in arm over pin (B) on outside
and secure with washer and retainer spring (J).
of tractor chassis and secure with retainer spring.
Repeat on opposite side of tractor.
Fig. 18
ATTACH REAR LIFT LINKS (C) - Lift rear corner of
mower and position slot in tink assembly over pin (D)
on rear mower bracket and secure with washer and
retainer spring.
Repeat on opposite side of tractor.
Fig. 19
Fig, 20
Hook end of clutch cable spring (Q) into hole in idler
arm (R).
Push clutch cable housing guide (P) into bracket, slide
collar (L) onto guide and secure with retainer spring (K).
Install belt on engine pulley (M).
ATTACH FRO NT LINK (E) - Work from left side of trac
tor. Insert rod end of link assembiy through front hote
in tractor front suspension bracket (F).
Fig. 21
IMPORTANT:
CHECK BELT FOR PROPER ROUTING
IN ALL MOWER PULLEY GROOVES.
Raise attachment lift lever to highest position.
If necessary, adjust gauge wheels before operating
mower as shown in the Operation
section of this
manual.
Fig. 22
03042
19
Advertisement
