Control, Maintenance And Service Of The Macnine's Safety Equipment; Stop Switch/Muffler Maintenance; Vibration Damping System Maintenance - Husqvarna 125BT Operator's Manual

SAFETY INSTRUCTIONS
Control, maintenance and service of
the machine's safety equipment
IMPORTANT INFORMATION
• All service and repairs to the machine require
special training.
• This applies especially to the machine's safety
equipment. If the machine does not meet any of
the controls listed below you should contact your
service workshop.
The purchase of one of our products
guarantees that professional repair and servicing
will be carried out on it. If the point of purchase is
not one of our servicing dealers, please ask for
details of the closest service workshop.
1. Stop switch
• Start the engine and ma|,e
sure that the engine stops
when the stop switch is
moved to the stop
position.
3. Muffler
1. Never use a machine that
has a defective mufNer.
2. Check regularly that the
mufl]er is secure.
3. If your muffler is f_tted
with a spark arrest screen
then it should be cleaned
regularly. A blocked
screen leads to _le engine
overheating with serious
damage as a result. Never
use a muffler with a
defective spark arrest
screen.
2. Vibration
damping system
• Check the vibration
damping element
regularly for material
cracks and distortion.
• Check that the vibration
damping element is
undamaged and secure[?,
attached.
WARNING!
Never use a machine with defective
safety equipment. The safety equipment
should be maintained as described in this
section. If your machine does not meet
any of these controls you should contact
your service workshop.
8 - English