Advertisement
ASSEMBLY
CHECK
TIRE PRESSURE
The tires on your tractor were overinflated at the factory for
shipping purposes.
Correct tire pressure is important for
best cutting performance.
•
Reduce tire pressure to PSI shown in "PRODUCT
SPECIFICATIONS"
section of this manual.
CHECK
MOWER
LEVELNESS
For best cutting results, mowershould be properly leveled.
See "TO LEVEL MOWER HOUSING" in the Service and
Adjustments section of this manual.
CHECK
FOR
PROPER
POSITION
OF ALL
BELTS
See the fgures that are shown for replacing motion, mower
drive, and mower blade drive belts in the Service and
Adjustments section of this manual. Verify that the belts
are routed correctly.
CHECK
BRAKE
SYSTEM
After you learn how to operate your tractor, check to see
that the brake is properly adjusted.
See "TO ADJUST
BRAKE" in the Service and Adjustments
section of this
manual.
,[ CHECKLIS
T
BEFORE YOU OPERA TEAND ENJOY YOUR NEW TRAC-
TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE
BES TPERFORMANCE AND SA TISFA C TION FROM THIS
QUALITYPRODUCT.
PLEA SE RE VIE W THE FOL L 0 WING CHECKL IS T:
J
All assembly instructions have been completed.
J
No remaining loose parts in carton.
J
Batteryis properly prepared and charged. (Minimum 1
hour at 6 amps).
J
Seat is adjusted comfortably and tightened securely.
J
All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).
J
Be sure mower deck is properly leveled side-to-side/
front-to-rear for best cutting results.
(Tires must be
properly inflated for leveling).
J
Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers.
J
Check wiring. See that all connections are still secure
and wires are properly clamped.
J
Before driving tractor, be sure freewheel control is in
drive position.
WHILE LEARNING HOW TO USE YOUR TRACTOR, PA Y
EXTRA A TTEN TION TO THE FOL L 0 WING IMPOR TAN T
ITEMS:
J
Engine oil is at proper level.
J
Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
J
Become familiar with all controls - their location and
function. Operate them before you start the engine.
J
Be sure brake system is in safe operating condition.
J
It is important to purge the transmission before operating
your tractor for the first time. Follow proper starting and
transmission
purging instructions
(See "TO START
ENGINE" and "PURGE TRANSMISSION" in the Opera-
tion section of this manual).
10
Advertisement
Troubleshooting
