Download
Share
Print this page
Husqvarna YTH1746A Owner's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Lawn Mower
  5. YTH1746A
  6. Owner's manual
Husqvarna YTH1746A Owner's Manual

Husqvarna YTH1746A Owner's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
YTH1 746
Owner's Manual

Advertisement

loading

Related Manuals for Husqvarna YTH1746A

Summary of Contents for Husqvarna YTH1746A

  • Page 1 YTH1 746 Owner's Manual...
  • Page 2 SAFETY RULES PRACTICES FOR RIDE-ON MOWERS IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERAL OPERATION disengage the blades and proceed slowly straight down the slope.
  • Page 3 SAFETY RULES Safe Operation Practices for Ride-On Mowers & • Be sure the area is clear of other people before mowing. Stop machine if anyone enters the area. Look for this symbol to point out im- • Never carry passengers or children even with the blades off. portant safety precautions.
  • Page 4 PRODUCT SPECIFICATIONS CUSTOMER RESPONSIBILITIES GASOLINE CAPACITY 2.0 GALLONS • Read and observe the safety rules. AND TYPE: UNLEADED REGULAR • Follow a regular schedule in maintaining, caring for and using your tractor. OILTYPE(API-SF/SG/SH): SAE 30 (above 32°F) • Followthe instructions under the "Customer Responsi- SAE 5W-30 (below 32°F) bilities"...
  • Page 5 UNASSEMBLED PARTS Mower Steering Wheel _emblies Steering Wheel Insert (3) Retainer Springs (1) Hex Bolt Steering 3/8-16 x 1 Wheel Steering Adapter Extension Shaft (4) Retainer Springs (single loop) Gauge Wheels ) Shoulder Bolts ]1_ [Adjusting _Wh(4) Bars II_ J Clevis Pins (1) Lock...
  • Page 6 ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.
  • Page 7 ASSEMBLY TO ROLLTRACTOR OFF SKID (See Operation SEAT PAN section, page 12, for location and function controls) • Press lift lever plunger and raise attachment lift lever to LABEL its highest position. BOX DOOR • Release parking brake by depressing clutch/brake pedal. •...
  • Page 8 ASSEMBLY ASSEMBLE GAUGE WHEELS TO MOWER TRAILING EDGE UP MANDREL ASSEMBL_ DECK (See Fig. 5) BLADE CENTER The gauge wheels are designed to keep the mower deck in HOLE proper position when operating mower. Be sure they are properly adjusted to ensure optimum mower performance. FLAT •...
  • Page 9 ASSEMBLY • Slide left side of mower back and install the unattached INSTALL MOWER AND DRIVE BELT (See front link in top hole of the L.H. front mower bracket. Figs. 8 and 9) Retain with single loop retainer spring as shown. Be sure tractor is on level surface and mower suspension •...
  • Page 10 ASSEMBLY CHECK TIRE PRESSURE ,/CHECKL IS T The tires on your tractor were overinflated at the factory for BEFORE YOU OPERA TEAND ENJOY YOUR NEW TRA C- shipping purposes. Correct tire pressure is important for TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE best cutting performance.
  • Page 11 OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. BATTERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING ENGINE ON ENGINE OFF OIL PRESSURE LIGHTS ON OVER TEMP _" LIGHT FUEL CHOKE MOWER HEIGHT...
  • Page 12 OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. ATTACHMENT IGNITION CLUTCH SWITCH LIGHT...
  • Page 13 OPERATION The operation of anytractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.
  • Page 14 OPERATION TO OPERATE ON HILLS • Be sure tractor is on a flat level surface. • Lower mower and adjust mower to desired cutting height. with slopes greater than 15 ° and do not • Remove retainer spring and clevis pin which secure CAUTION: Donotdriveupordownhills drive across any slope.
  • Page 15 OPERATION BEFORE STARTING THE ENGINE Insert key into ignition and turn key clockwise "START" position and release key as soon as engine starts. Do not run starter continuously for more than CHECK ENGINE OIL LEVEL (See Fig. 18) fifteen seconds per minute. If the engine does not start •...
  • Page 16 OPERATION • Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal. • Move motion control lever to full forward position and hold for five (5) seconds.
  • Page 17 CUSTOMER RESPONSIBILITIES MAINTENANCE SCHEDULE ____ ._'_°_ "_ S OOCO 'ETE F,LL,N DATES Check Brake Operation Check Tire Pressure Check Operator Presence Interlock Systems Check for Loose Fasteners Sharpen/Replace Mower Blades Ill4 Lubrication Chart Check Battery Level Clean Battery and Terminals Check Transaxle Cooling Adjust...
  • Page 18 CUSTOMER RESPONSIBILITIES TRACTOR TRAILING MANDREL EDGE UP CENTER ASSEMBLY Always observe safety rules when performing any mainte- HOLE nance. BRAKE OPERATION LOCK WASHER If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. HEX BOLT STAR (See "TO ADJUST BRAKE"...
  • Page 19 CUSTOMER RESPONSIBILITIES • Open battery box door. TO CHANGE ENGINE OIL (See Figs. 18 & 19) • Disconnect BLACK batterycablefirst then RED battery Determine temperature range expected before oil change. cable and remove battery from tractor. All oil must meet API service classification SF, SG or SH. •...
  • Page 20 CUSTOMER RESPONSIBILITIES ENGINE COOLING FINS (See Fig. 20) COVER KNOB Remove any dust, dirt or oil from engine cooling fins to prevent engine damage from overheating. CARTRIDGE • Remove oil fill cap/dipstick. COVER • Remove hex bolts from blower housing and lift housing off engine.
  • Page 21 SERVICE AND ADJUSTMENTS CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: Depress clutch/brake pedal fully and set parking brake. Place motion control lever in neutral (N) position. • Place attachment clutch in "DISENGAGED" position. • Turn ignition key "OFF" and remove key. •...
  • Page 22 SERVICE AND ADJUSTMENTS • Check primary idler arm and two idlers to see that they FRONT-TO-BACK ADJUSTMENT (See Figs. 26 and 27) rotate freely. IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLOWING FRONT-TO-BACK ADJUSTMENT • Be sure spring is securely hooked to primary idler arm NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS and bolt in mower housing.
  • Page 23 SERVICE AND ADJUSTMENTS • Pull belt slacktoward rear of tractor. Carefully remove MANDREL belt upwards from transmission input pulley and over MOWER BLADE DRIVE BELT cooling fan blades. CENTER MANDREL • Pull belt toward front of tractor and remove downwards PULLEY from around electric clutch.
  • Page 24 SERVICE AND ADJUSTMENTS IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 TRANSMISSION REMOVAL/REPLACEMENT VOLT NEGATIVE GROUNDED SYSTEM. THE OTHER Should your transmission require removal for service or VEHICLE MUST ALSO BE A 12 VOLT NEGATIVE GROUNDED SYSTEM. DO NOT USE YOUR TRACTOR replacement, it should be purged after reinstallation and BATTERY TO START OTHER VEHICLES.
  • Page 25 SERVICE AND ADJUSTMENTS • First connect RED battery cable to positive (+) terminal with hex bolt and keps nut as shown. Tighten securely. • Connect BLACK grounding cableto negative (-)terminal HOOD with remaining hex bolt and keps nut. Tighten securely. •...

  • Page 26: Storage

    STORAGE ENGINE Immediately prepare your tractor for storage atthe end of the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANT PREVENT DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM gasoline in the tank inside a building PARTS SUCH AS CARBURETOR,...

  • Page 27: Troubleshooting

    TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Will not start Out of fuel. Fill fuel tank. Engine not "CHOKED" properly. See "TO START ENGINE" in Operation section. Engine flooded. Wait several minutes before attempting to start. Bad spark plug. Replace spark plug. Dirty air filter.

  • Page 28: Troubleshooting

    TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Engine continues to run Faulty operator-safety presence control system. Check wiring, switches and connections. If not when operator leaves corrected, contact an authorized service center/ seat with attachment department. clutch engaged Poor cut - uneven Worn, bent or loose blade.
  • Page 29 TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 SCHEMATIC BATTERY SOLENOID FUSE STARTER WHITE JILl BLACK • WHITE WHITE BLACK ELECTRIC CLUTCH © CLUTCH / BRAKE _AAAAmO-- (PEDAL UP) c>4-- BLACK <o SWITCH 86 I IGNITION (NOT OCCUPIED) SEAT SWITCH PTO (DISENGAGED) ..

  • Page 30: Repair Parts - Tractor

    REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 ELECTRICAL 33 J i° \\\\\\...
  • Page 31 REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 ELECTRICAL PART DESCRIPTION 532144925 Battery 12 Volt 25 AMP 874760412 Bolt Hex Hd 1/4-20unc X 3/4 532156417 Case Battery Mech Hinge 532153664 Switch Interlock Push-In 532166181 Harness Asm Light W/4152j 532004152 Bulb Light #1156 532124780...
  • Page 32 REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 CHASSIS AND ENCLOSURES (__.._159...
  • Page 33 REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 CHASSIS AND ENCLOSURES PART DESCRIPTION 532169830 Chassis stamping 532169061 Drawbar, 12 Ga. 817060612 Screw 3/8-16x3/4 532155272 Bumper Hood/Dash 532171682 Dash Slkscr 872140608 Bolt Carriage 3/8-16 x 1 532155927 Panel Dash Lh 532145660...
  • Page 34 REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 DRIVE _..--202 165 156 _:h_ 151 36 35 26 J...
  • Page 35 REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 DRIVE KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION Screw 3/8-16 x 3/4 Transaxle Hydro Gr. 314-0510 817060612 (Order parts from transaxle mfg.) 532124872 Cover, Pedal 532165619 Rod Shift Fender Adjust LT 532145868...
  • Page 36 REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 STEERING ASSEMBLY " .._'_41...
  • Page 37 REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 STEERING ASSEMBLY PART DESCRIPTION 532166627 Wheel Steering 532172393 Axle Cast LT Machined 532169840 Spindle Asm Cast LH 532169839 Spindle Asm Cast RH 532124931 Bearing Race Thrust Harden 532121748 Washer 25/32 X 1-5/8 X 16 Ga 812000029...
  • Page 38 REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 SEAT ASSEMBLY KEY PART KEY PART NO. NO. DESCRIPTION NO. NO. DESCRIPTION 532140839 Seat 532121248 Bushing Snap BIk Nyl 50 Id 532140551 Bracket Pivot Seat 8 720 872050412 Bolt Rdhd Sqnk 1/4-20xl -1/2 871110616...
  • Page 39 REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 DECALS PART PART DESCRIPTION DESCRIPTION 532157032 Decal Oper. Step Thru E/F 532176822 Decal Fender Husq 532145005 Decal Battery 532157140 Decal Fender Danger E/F 532176780 Decal Hood RH 532176775 Decal Engine Logo 532176781...
  • Page 40 REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 ENGINE OPTIONAL EQUIPMENT Spark Arrester PART PART DESCRIPTION DESCRIPTION 532170551 532123487 Control Th/ch Flag Dom. Clamp Hose Black 817720410 Screw Hex Thd Cut 1/4-20x5/8 T 532137040 Line Fuel 532148315 Engine B&S Model 311777 Plug Drain Oil Easy...
  • Page 41 REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 MOWER LIFT 1718 20 13-----.zy PART PART DESCRIPTION DESCRIPTION 532159460 819131016 Washer 13/32 X 5/8 X 16 Ga Wire Asm Inner W/plunger 532159471 Shaft Asm Lift RH w/Inf 532124874 Spring 2-1/8"...
  • Page 42 REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 MOWER DECK 3743 50._ 33 _ _/_9 ° 91 " ._ \_dl 103102 106_ I /f,_104105 v ?_7,j / /}1 I 103 106 _102...

  • Page 43: Repair Parts - Tractor

    REPAIR PARTS TRACTOR - MODEL NO. YTH1746 (YTH1746A), PRODUCT NO. 954 56 70-55 MOWER DECK PART PART DESCRIPTION DESCRIPTION 532177085 532177083 Deck Weldment Mower HD 46 WAD Arm, Idler Secondary 532138457 532133943 Washer, Hardened Bracket Asm., Sway Bar 532145059 532124670 Cover, Mandrel Deck Retainer Spring 532130832...
  • Page 44 SERVICE NOTES...
  • Page 45 SERVICE NOTES...
  • Page 46 SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SIGHTING GUIDE SIGHT AND HOLD THIS LEVEL WITH SKY LINE OR TREE. 15 ° MAX. Operate your Tractor up and down the face of slopes (not greater than 15°), never across the face.

  • Page 47: Warranty

    Husqvarna dealer in a timely manner, no later than thirty (30) days (4) Lawn and garden attachments are covered by a third party that gives a warranty, all claims for from date of the operational problem or failure.
  • Page 48 532176856 Rev. 1 03.23.01 Printed in U.S.A.