Basic Working Techniques - Husqvarna 325HS75 Operator's Manual

SAFETY INSTRUCTIONS
Protective instructions when
work is completed
• The transport guard should always be fitted to the blades
when the machine is not in use.
• Ensure tile blades have stopped and remove the spark plug
cable from the spark plug before carrying out cleaning,
repairs or an inspection.
• Always wear heavy duty
gloves when repairing the
blades. The blades are
extremely sharp and can
easily causes cuts.
• Store the machine out of
reach from children.
Only use original spare
parts when carrying out
repairs.
Basic working
techniques
• When cutting the sides
of a hedge, work from
the bottom upwards.
When cutting
horizontally, work from
right to left.
• Adjust the throttle
setting to suit the load.
• When trimming a hedge
the engine should always
be turned away from the
hedge.
• The hedge trimmer
should be held as close
to the body as possible
to get the best balance.
• Make sure that the tip
does not touch the
ground.
•
Do
not tt T to force the
work, but move at a
steady speed so that all
the stems are cut evenly.
10
- English