General Safety Instructions; Fuel Safety; Transport And Storage - Husqvarna 325HS75 Operator's Manual

SAFETY INSTRUCTIONS
General safety instructions
IMPORTANT INFORMATION
The machine is only designed for cutting
branches and twigs.
Never use the machine if you are tired, if you
have consumed alcohol, or if you are taking
medicines that can affect your sight, your
judgement or the control of your body.
Use personal protective equipment. See the
section "Personal protective equipment".
Never use a machine that has been modified so
that it no longer corresponds with the original
design.
Never use a machine that is faulty. Follow the
maintenance, control and service instructions in
this Operator's Manual.
Some maintenance and service actions should
be carried out by trained and qualified
specialists. See the chapter "Maintenance"
All covers and guards must be fitted before
starting the machine. Check that the spark plug
cap and HT lead are not damaged, otherwise
you could get an electric shock.
Start
• The gearbox and clutch drum must be fitted before the
machine is started, otherwise the clutch can become loose
and cause personal injury.
• Never start the machine indoors. Bear in mind the dangers
of inhaling the engine's exhaust fumes.
Observe your surroundings and make sure that there is no
risk of people or animals coming into contact with the
cutting equipment.
• Place the machine on the
ground, make sure the
blades are free from
branches and storms.
Press the machine body
against the ground using
your left hand
(NOTE!
Do not use your foot).
Grip the starter handle
with your right hand and
pull the starter cord.
@
Fuel safety
• Always use a fuel
container with an anti-
spill valve.
• Never fill the machine
while the engine is
rurming. Always stop the
engine and let it cool for
a few minutes before
refuelling.
• Provide good ventilation
when filling or mixing
fuel (petrol and 2-stroke
oil).
•
Move
the machine at
least 3
m from the filling
position before starting.
•
Never
start the machine:
a) If you have spilt fuel on
it. Wipe up all spillage.
b) If you have spilt fuel on
yourself or your clothes.
Change your clothes.
c) If there is a fuel leak.
Make regular checks for
leakage from the fuel cap
and the fuel supply pipes.
Min. 3 m
(10ft)
Transport and storage
Store and transport the machine and fuel so that any
leakage or fumes do not risk coming into contact with
sparks or naked flames. For example, electric machines,
electric motors, electrical switches/power switches, heaters
or the like.
• When storing and transporting fuel, approved containers
intended for this purpose must be used.
• When storing the machine for long periods the fuel tank
must be emptied. Contact your local petrol station to find
out how to dispose of excess fuel.
• The blades transport guard should always be fitted when
transporting or storing the hedge trimmer.
8 - English