Hoover SteamVac aqility Manual page 13

,/ Empty solution tank and rinse thoroughly.
,/ Place empty solution tank on deep cleaner. Turn deep cleaner ON. Squeeze trigger and push
deep cleaner forward and back several times. This will clear any solution remaining inside the
cleaner.
,/ Empty recovery tank, rinse thoroughly and let air dry.
_/ Allow brushes and underside of deep cleaner to air dry thoroughly before storing deep
cleaner on a carpeted or wood surface.
Lubrication
The motor is equipped with bearings which contain sufficient lubrication for the life of the motor.
The addition of lubricant could cause damage. Do not add lubricant to motor bearings.
To obtain approved HOOVER serv]ce and genuine HOOVER parts, locate the nearest Hoover
Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot) by:
,/ Checking the Service Section of The Hoover Company on-line at www.hoover.com OR
,/ Checking the list of Factory Service Centers provided with this cleaner OR
,/ Checking the Yellow Pages under "Vacuum Cleaners - Household" OR
,/ Calling 1-800-944-9200 for an automated referral of authorized service outlet locations
(U.S. only)
Do not send your cleaner to The Hoover Company in North Canton for serv]ce: this will onlv result
in delay.
If further assistance is needed, contact The Hoover Company Consumer Response Center, North
Canton. Ohio 44720. Phone: 330-499-9499.
In Canada. contact Hoover Canada. Burlington, Ontario L7R 4A8. Phone: 1-800-263-6376.
Always identify your cleaner by the complete model number when requesting information or order-
ing parts. (The model number appears on the back of the cleaner.)
Continued -P 13