Hitachi 42HDS69 Operating Manual page 52

Set Event Timer
This function will automatically operate the Plasma TV
viewing reservation of a program. If the clock is not set,
you can not use this function and the screen below will
appear. The message on the screen will disappear after
3 seconds, then the screen automatically goes to the
clock setup mode (see page 50).
1,
2,
6,
7,
8,
9,
Use the CURSOR PAD A, • to highlight EVENT 1,
EVENT 2, EVENT 3, EVENT 4 and then press the
SELECT button to select.
Use the CURSOR PAD •, • or • to highlight and
select START TIME HOUR/MINUTE.
Use the CURSOR PAD A, • or • to highlight and
select START TIME AM/PM.
Use the CURSOR PAD I_, • or • to highlight and
select FINISH TIME HOUR/MINUTE
Use the CURSOR PAD I_, • or • to highlight and
select FINISH TIME AM/PM.
Use the CURSOR PAD I_ to highlight the MONTH.
Use the CURSOR PAD • to select a MONTH or
CURSOR PAD • to select DAILY, WEEKLY -
SUNDAY TO MONDAY. Use the CURSOR PAD <1
to return to MONTH.
Use the CURSOR PAD !_, • or • to highlight and
select the DAY of the MONTH.
Use the CURSOR PAD I_, • or • to highlight and
select the YEAR.
10. Use the CURSOR PAD I_, • or • to highlight and
select CABLE or AIR.
11. Use the CURSOR PAD I_, • or • or NUMBER buttons to set the channel the TV will tune into. A [_' in the
box means it is enabled.
52