Hitachi 42HDS69 Operating Manual page 18

S-VIDEO, Y-PBPR, orHDMI connections areprovided forhigh performance laserdisc players, VCRs e tc. t hat
have thisfeature. Use these connections inplace ofthestandard video connection ifyour d evice h as this
feature.
Ifyour d evice h as only oneaudio output ( mono s ound), connect it totheleftaudio jackon(L/(MONO)) the
Rear P anel.
Refer totheoperating guide ofyour o ther e lectronic equipment foradditional information onconnecting
your h ook-up c ables.
Asingle VCR canbe
used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line
output (INPUT: 1 in the example on page 14). Refer to your VCR operating guide for more information on
line input-output connections.
Connect only 1 component (VCR, DVD player, camcorder, etc.) to each input jack.
COMPONENT: Y-PBPR (Input 3, 4 & 5) connections are provided for high performance components, such as
DVD players and set-top-boxes. Use these connections in place of the standard video connection if your
device has this feature.
Your component outputs may be labeled Y, B-Y, and R-Y. in this case, connect the components B-Y
output to the TV's PB input and the components R-Y output to the TV's PR input.
Your component outputs may be labeled Y-CBC R. In this case, connect the components C B output to the
TV's PB input and the components C R output to the TV's PR input.
It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PBPR inputs. (See
page 37)
To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-PBPR, and
HDMI input jacks.
Input 1 , 2 or 5 can accept HDMI signal.
S-VIDEO monitor output may be used for recording only when the input is of S-VIDEO type.
When using a HDMI input from a Set-Top-Box, it is recommended to use a 1080i or 720p input signal.
18