Hitachi 42HDS69 Operating Manual page 12

®
POWER light indicator
To turn the TV ON, press the main power
switch located on the lower right side of the
IV. A red stand-by indicator lamp located on
the lower right corner of the front bezel will
illuminate. The Plasma TV is now ready for
remote ON/OFF operation.
Lamp1 Lamp2
Indicating Lamp Power Status Operating
Lampl Lamp2
Off Off OFE When the main power switch is set to Off.
Lights Off OFE When the main power switch on the TV
Red (Stand-by) is ON.
Off Blinking OFE
%/MAIN POWER is ON ; but no picture is shown.
Blue (Turning ON )
Off Lights O n TV MAIN POWER is ON ; picture is shown.
Blue
Lights Off TV MAIN POWER is ON with no signal input
Orange Off (Power Saving) except antenna (no sync. signal).
® REMOTE CONTROL sensor
Point your remote at this area when selecting
channels, adjusting volume, etc.
®
Component SIDE INPUT JACKS (for INPUT: 5)
INPUT 5 provide Y-PBPR jacks for
connecting equipment with this capability, such as
a DVD player or Set Top Box. You may use
composite video signal for this input.
12