Hitachi 42HDS69 Operating Manual page 42

Select CHANNEL
MANAGER to set your Antenna
options, run Auto Channel Scan, Check Signal Meter
and Set Channel List.
1. Press CURSOR PAD J,, • or CHANNEL UP/DOWN
buttons to highlight function.
2. Press the SELECT button or CURSOR PAD I_ to
select.
Signal Meter
Select SIGNAL METER when using an indoor or outdoor
antenna. This feature will show the signal strength and
peak values of the Antenna signal to help you adjust your
antenna to optimize signal reception.
Use the CURSOR PADS and the SELECT button to
highlight and select CLOSE to exit.
2,
'3,
I
42
Auto Channel Scan
This feature will automatically store active Analog and
Digital channels in Auto Channel Scan memory.
Use the CURSOR buttons< or • to highlight
AIR, CABLE (1) or CABLE(2) source.
Press the CURSOR buttons < or • to highlight the
START or RESET option.
Press the SELECT button to select.