Hitachi 42HDS69 Operating Manual page 44

This function will b lock o utthe picture a nd sound o fthe
selected channel orvideo input.
The code toenter the Locks f eature isafour digit
access code number. The factory p reset code is0000.
Use theNUMBER buttons toenter theaccess code.
1. Use theCURSOR
PAD A, _' or CHANNEL
UP/DOWN buttons to highlight the desired function
in the LOCKS menu.
2. Press the SELECT button to select.
Change Access Code
1. To change the ACCESS CODE NUMBER, select
CHANGE ACCESS CODE to change the factory
preset code {0000} to your preference.
If you forget your ACCESS CODE NUMBER, use
the factory code 7777 to erase your key number,
This will reset the access code number back to the
factory preset (0000).
2. Enter a new four digit number.
3. Press EXIT to quit the menu.
Engage Lock
When ENGAGE LOCK is selected, SET CHANNEL LOCK and SET FRONT PANEL LOCK can be set individually.
When SET CHANNEL LOCK is turned on, the picture and sound for the chosen channel will be blocked out.
When FRONT PANEL LOCK is turned on, all buttons on the Front Panel will be deactivated, except the
POWER button.
When MOVIE RATINGS is selected, you can block various types of movies and video tapes based on motion
picture ratings. Picture-in-Picture will also be blocked automatically (see page 45).
When "IV RATINGS is selected, various types of television programming based on a parental guide ratings will be
blocked. Picture-in-Picture will also be blocked automatically (see page 46).
Use CANADIAN RATINGS to block various types of movies and television programs based on the two rating
systems used in Canada that you feel may be inappropriate due to its content (see pages 47-48).
Use ALTERNATE RATINGS (U.S.)to block various types of movies and television pograms based on ratings
systems used in U,S. that you feel may be inappropriate due to its content (see page 49).
44