Fuelling - Husqvarna 125R Operator's Manual

FUEL HANDLING
Mixing
• Always mix the gasoline and oil in a
clean container intended for fuel.
• Always start by filling half the amount of
the gasoline to be used. Then add the
entire amount of oil, Mix (shake) the fuel
mixture, Add the remaining amount of
gasoline.
• Mix (shake) the fuel mixture thoroughly
before filling the machine's fuel tank,
• Do not mix more than one month's sup-
ply of fuel at a time.
• If the machine is not used for some time,
the fuel tank should be emptied and
cleaned.
_ ARNING:
The catalytic con-
verter muffler gets very hot during
and after use. This also applies
during idling. Be aware of the fire
hazard, especially when working
near flammable substances and/or
vapors.
Fuelling
&
WARNING: Taking the following
precautions, will lessen the risk of
fire:
Do not smoke or place hot objects
near fuel.
Always shut off the engine before
refueling.
Always stop the engine and let it
cool for a few minutes before refu-
elling.
When refueling, open the fuel cap
slowly so that any excess pressure
is released gently.
Tighten the fuel cap carefully after
refueling.
Always move the machine away
from the refueling area before
starting.
• Clean the area around the fuel cap,
Contamination in the tank can cause
operating problems.
• Ensure that the fuel is well mixed by shak-
ing the container before filling the tank.
in. lOfeet
3 meters) L_r'_
14