Operation - HAMPTON BAY Room Air Conditioners Installation & Operation Manual

x 5
3. MECHANICAL CONTROL PANEL
The pictured control panel is similar to your panel.
_iii_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_1i_H1ii_ ¸
c
o_
Caution: If air conditioner is shut off, wait a minimum
of three minutes before restarting.
Ope_ Ve_t Doo_ - When the vent door is
open it allows for fresh air to circulate and for
stale air to be removed from the room. Maximum
air circulation and cooling occur when the vent
door is CLOSED.
Master Conlrol - The Master Control turns the
unit offand on. It is also used to select the desired
function of the unit such as HI COOL, MED COOL
(on some models), LO COOL, HI FAN, MED FAN
(on some models) or LO FAN. When one of the fan
functions is selected, the unit will only circulate
the existing room air. The unit will only cool the
air when one of the cool functions is selected.
Thermostat - The Thermostat Control adjusts
the sensitivity of the unit thermostat, which regu-
lates the room temperature by automatically turn-
ing the compressor on and off. The cooler the
setting, the cooler the room temperature will be.
Cooling Operation
1, Close the vent door.
2, Turn the Thermostat Control to "Cooler".
3, Turn the Master Control to HI COOL.
4., If the room becomes to cool for comfort, turn
the Thermostat Control counterclockwise
until the compressor turns off (air-circulating
fan will remain in operation).
S, When the desired comfort level is reached,
the Master Control may be turned to
LO COOL,
6. To turn off unit or in the event of a power
interruption, turn the Master Control to OFF.
Heating Operation -
Heating Models Only
1. Close Vent.
2. Turn Thermostat to "Warmer".
3. Turn Master Control to HI HEAT.
4. If room becomes too warm for comfort, turn
the Thermostat clockwise until the heating
elements turn off (air circulating fan will
remain in operation). The temperature will
be automatically maintained. Further adjust-
ment of Thermostat may be needed to reach
desired comfort level,
5. When the desired comfort level is
reached, the Master Control may be turned
to LQ HEAT,
6. To turn unit off, or in event of power inter-
ruption, turn Master Control to OFF,
Air Circulation Without Cooling
1. Close the vent door.
2. Turn Master Control to HI FAN.
Exhaust Operation
Without Cooling
1. Open the vent door.
2. Turn Master Control to HI FAN.