Hoover UH40110 Owner's Manual page 8

Attach wand and tools
How to clean tools
To clean the hose and the powered hand
tool, wipe off dirt with a cloth dampened in
a mild detergent, Rinse with a damp cloth.
Do not submerge powered hand tool in
water.
Cleaning tools may be washed in warm
water with a detergent.
Rinse and air dry
before using.
A
B
Attach tool or wand to the hose [A) by
pushin 9 it firmly into hose,
Attach second wand or tool to wand [BI by
pushing it firmly onto the wand,
Twist wand or tool slightly to tighten or
loosen the connection,
Extra reach hose
(available at additional cost if not included
with your cleaner)
D
Stair cleaning
Push Custom Control
TM
switch to OFF posi-
tion.
Align end of extra reach hose with projec-
tions (C] over slots [D] on end of attached
hose,
Slide hose into slots and twist hose to lock
it in place, [To detach hose, reverse proce-
dure.}
Attach wands or tools to the other end of
hose.
Use the hose and powered
hand tool or fur-
niture nozzle for stair cleaning.
CAUTION: To prevent the cleaner from fall-
ing, always place it at the bottom of the
stairs,
With handle in upright position,
clean from
bottom to top.
How to attach tool cover
The tool cover is designed with a "break-
away" feature which allows it to snap free if it
is pushed open too far,
To reattach, align hinges of cover with slots on
sides of tool storage area,
Push cover down to secure in place,