Hoover UH40110 Owner's Manual page 18

B. If a blockage
occurs during tool
use:
Turn cleaner OFF
and disconnect
from electrical
outlet.
1. Look into hose
end and remove
any blockage.
Service
To obtain approved HOOVER service and
genuine HOOVER parts, locate the nearest
Hoover Sales and Service Center or Authorized
Hoover Warranty Service Dealer (Depot] by:
* checking the Yellow Pages under Vacuum
Cleaners - Household" OR -
* checking the Service section of The
Hoover Company on-line at www.hoover.com
OR-
• cal]ing 1-800-944-9200 for an automated
referral of authorized service outlet loca-
tions [U.S. only).
Do not send your cleaner to Hoover, Inc.,
Company in Glenwillow for service, this will
only result in delay.
C. If a blockage occurs during powered hand
tool use:
1. Disconnect powered hand tool from hose.
Remove bottom plate, belt guard and tur-
bine as described in Figs. 3-23, 3-24 and
3-29.
Remove any blockage from turbine channel
{B}.
Replace belt turbine, brush roll, belt guard
and bottom plate.
If further assistance is needed, contact The
Hoover Consumer Response
CenteL Phone: 1-800-263-6376.
In Canada, contact Hoover Canada, Eto-
bicoke, Ontario MSW 3R9, Phone:
IL800-263-6376 Mon-Fri 8AM-TPM EST.
Always identify your cleaner by the complete
model number when requesting informa-
tion or ordering parts. {The model number
appears on the back of the cleaner.)
t8