Installation Instructions - Friedrich CP Line CP08 Installation And Operation Manual

Installation Instructions
Read these instructions completely and carefully.
Tools You Will Need
Phillips-head screwdriver
Flat-blade screwdriver
Ruler or tape measure
Before YouBegin
3 Scissors or knife
3 Pencil
3 Level
3 Hammer
NOTE TO INSTALLER: Leave these
instructions with the air conditioner after
installation is completed.
NOTE TO CONSUMER: Keep this Installation
and Operation Manual for future use.
Important
notes:
It is recommended that proper attire be worn
during installation.
For personal safety, this air conditioner must
be properly grounded.
It is important to have the wall outlet and circuit
checked by a qualified electrician if there is any
doubt as to whether a proper ground exists.
CAUTION:
Do not under any circumstances, cut or remove
the third (ground) prong from the power cord.
Do not change the plug on the power cord of
this air conditioner.
Aluminum house wiring may present special
problemsELonsult a qualified electrician.