Hoover SteamVac F5918-900 Owner's Manual page 6

Upfront tool
storage
On some models, a powered hand tool
stores behind the door on front of the
handle (M).
On other models, the stair/upholstery
nozzle stores in this area (N).
Powered hand tool
The powered hand tool is shipped in a
plastic bag for protection. To remove the
bag before using the tool, open tool
door.
Pull tool down and outward. Remove tool
from bag. Discard bag.
To replace tool, push connector end of
tool (0) up into opening in storage area.
Snap nozzle into place.
Stair/upholstery nozzle
To store stair/upholstery nozzle, open
tool door, place nozzle in bracket and fit
it securely into position. To remove,
reverse this procedure.
For models with the powered hand tool,
the stair/upholstery nozzle stores on the
back of the cleaner (Fig. 1-15).
How to reattach tool
cover
The tool cover is designed with a break-
away feature which allows it to snap free
if it is pushed open too far.
To reattach, align hinges of cover with
slots on sides of tool storage area.
Push cover down to secure in place.