Connecting External Video Sources - Hitachi 51M200A Operating Manual

CONNECTING EXTERNAL VIDEO SOURCES
iiiiiiiiiiii_77i7ii
iiiiiiiiiiii_i77
iiiiiii_iii_!i_i
iiiiiiiiiiii !i!i!ii! ii,i
iiiiiiiiiiii Tiiiiiiiil
iiiiiiiiiiii i!;iii!i!i
CONNECTING A STEREO SOURCE TO INPUT1 ~INPUT5
t. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the
Projection Monitor below.
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4. Press the VID4 button to view the program from the VCR or laserdisc player. The VIDEO label disappears automatically
after approximately four seconds.
OUTPUT
R L V
©©©
VCA
I NOTE:
Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
I
16