Connecting External Video Sources - Hitachi 50VG825 Operating Manual

Connecting External Video Sources

The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top
Box to your TV set is dependent on the model and features of each component. Check the owner's manual of
each component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to
accommodate your particular assortment of components and features. For best performance, video and audio
cables should be made from coaxial shielded wire.
BEFORE OPERATING
EXTERNAL VIDEO SOURCE
Connect an external source to the INPUT terminal, then
press the INPUTS button to show the INPUTS menu.
Use the CURSOR PAD to select the CABLE, AIR or
INPUT of your choice. Then press the SELECT button
to confirm your choice (see page 24).
NOTE: When the TV is set to VIDEO and a video
signal is not received from the VIDEO INPUT
JACK on the back panel of the TV (i.e.,
VCR/laserdisc player, etc. is not connected or
the video device is OFF), the set will appear
to be OFF.
CONNECTING A COMPOSITE VIDEO AND
MONAURAL AUDIO SOURCE TO INPUT1 –
INPUT5
1. Connect the cable from the VIDEO OUT of the VCR
or the laserdisc player to the INPUT (VIDEO) jack,
as shown on the TV set on the right.
2. Connect the cable from the AUDIO OUT of the
VCR or the laserdisc player to the INPUT
(MONO)/L(AUDIO) jack.
3. Press the INPUTS button, then select INPUT 4
from the INPUTS menu to view the program from
the VCR or the laserdisc player. The VIDEO OSD
label disappears automatically after approximately
four seconds.
4. Select CABLE from the INPUTS menu to return to
the last channel tuned.
NOTE: The INPUT 3 can be used in the same
manner as INPUT 4.
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
Input 5
Photo Input
Cable
Air
Input 1
Move
Connect the
Cable and/or
Air cables
MONITOR OUT
S
I
V
I
D
E
O
V
I
D
E
O
A
U
D
I
O
AUDIO
TO HI-FI INPUT 1
SEL Sel.
Apparatus Claims of U.S.
CableCARD™
Patent Nos. 4,631,603;
4,577,216; 4,819,098;
(Top of card faces right)
CABLE 4,907,093; and 6,381,747
licensed for limited
viewing uses only.
Top faces
AIR
Y/ Y/
VIDEO VIDEO
P P P P
B B B B
OPTICAL OUT
Digital Audio
P P P P
R R R R
/
G-LINK
(MONO) (MONO) (MONO) (MONO)
L
TV AS CENTER
R
INPUT 2 INPUT 3 INPUT 4
Audio Video
OUTPUT
VCR
Upgrade Card
HDMI INPUT 1
HDMI INPUT 2
CAUTION
15