Hook-Up Cables - Hitachi 51M200A Operating Manual

HOOK-UP CABLES AND CONNECTORS
iiiiiiiiiiii ii iiiii!iiiiiiiiiil
iiiiiiiiiiii i!:ili!iiiii!i!i
Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors.
For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell
audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output
and input connector types required by the various components and the length of each cable.
Phono Connector
Used on all standard video and audio cables which
connect to inputs and outputs located on the Projection
Monitor's rear jack panel and front control panel.
S-Video (Super Video) Connector
This connector is used on camcorders, VCRs and laser-
disc players with an S-Video feature in place of the
standard video cable to produce a high quality picture,
Digital Visual Interface (DVI) Connection Cable
This cable is used to connect external devices with
DVI-HDTV output capability, it delivers digital video in
its native format. Audio information is carried sepa-
rately.