Guide Indications In Vcr Display; And Osd Screen - Hitachi VT-UX6430A Owner's Manual

• Guide indications in VCR display and OSD screen
The following indications appear in the VCR display and OSD screen to tell
OSD
Indication
i
(flashes for about S seconds)
(flashes for about 5 seconds)
flashes for about 5 seconds)
flashes uninterruptedhf)
When it appears
When
programming the
timer
When
programming the
timer (by using
VCR display)
When
programming the
timer
When you turn
power off after
programming the
' timer, or transfer
the programming
with power off
Display for about 5 sec.
Display for about 5 sec.
• (flashesfor about 3 seconds)
When you press
the play, record,
fast forward,
rewind or super
index button
(flashes for about 3 seconds)
When you press
the record button
for recording or
dubbing, or press
the _ (VIEW/
SKIP/BLANK)
button for BLANK
SEARCH
(fleshesforabout3seconds)
When you turn
power on
_outhe current status of your VCR.
Meaning and troubleshooting
• The VCR clock has been set
to "- - : --",
Set the time and program
the timer.
• A non-existing PlusCode
number has been entered.
Check the PlusCode
number of the program
and enter it again.
• Eight programs have
already been stored.
Cancel unnecessary
program and transfer the
new programming.
• A cassette has not been
inserted or a cassette
without safety tab has
been inserted. A cassette
without safety tab will be
ejected automatically.
Insert a cassette with
safety tab intact.
• A cassette has not been
inserted. Insert a cassette.
• A cassette without safety
tab has been inserted. It
will be ejected
automatically. Insert a
cassette with safety tab
intact.
• The video heads are dirty.
Cleaningthem is
recommended. To switch off
the CL display, cleanthe
heads,turn the power off and
pressthe channel • button.
The CL display automatically
switches off when recording
and playbackare performed
for about 5 hours after it
appears.
6O