Table of Contents
Advertisement
_(D
G) <D
® e)
vcl_v
a_lm
(ZD CD CZ) _
pROGRAM
0
IlIIl|
I
I
Press the PROGRAM button to
P_i
[
complete
your programming
or
!ll
11-7.-11-7_
continue with additional
ILl C1_1¥
programs.
/
The delayed recording indicator
(Delayed
recording I
will display on the VCR and TIMER
indicator will light up.
This tells you that the VCR will
automatically
record at the times
and dates you have programmed.
indicator)
/
\,
o,,
To,_j
TIMER indicator
Note:
If a cassette has not been inserted
or a cassette without
safety tab
has been inserted,
the delayed
recording
indicator
and TIMER indicator
will flash to warn you.
The cassette
without
safety tab will be ejected automatically.
Be sure to
insert a cassette with safety tab intact.
hen you have set up all the timed recordings you want:
• Don't forget to load a videocassette
(with the safety tab still attached)
to record on.
• If you have installed a cable box (see page 26), turn on the cable box
and select the channel you want to record on the cable box before
recording starts.
Important: Your timed recording settings take effect when you turn off
the power on the VCR.
Caution of VCR Plus+ Recording
After entering a PlusCode number, check the information
displayed with
the "PROGRAM
REVIEW".
If there is (are) any unnecessary program(s),
please cancel or correct it (tftem).
Please refer to page 53, "Reviewing
what you have programmed".
To go into the recording mode:
1. Press the POWER button to turn the VCR on.
2. Turn on "IV and select the video channel (3 or 4).
3. Press the TAPE SPEED button to switch the recording mode.
52
Advertisement
Table of Contents
