Healthrider S700i HRTL16990 User Manual page 22

THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also al-
lows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode,
To select the information mode, hold down either of the
Stop buttons while inserting the key into the console.
When the information mode is selected, the following
information will be shown:
The Time/Segment Time
display will show the total
number of hours that the
treadmill has been used.
The Distance/Incline display
will show the total number of
miles that the walking belt
has moved.
I fI_- m_-tii
THE OPTIONAL CHEST PULSE SENSOR
The optional chest pulse sensor can be worn during
your workouts on the treadmill, allowing hands4ree and
continuous heart rate monitoring. In addition, the chest
pulse sensor allows you to use the console's two pulse
programs.
Chest Pulse Sensor
To purchase the optional chest pulse sensor, call
toll-free 1-800-201-2172.
Note: The chest pulse sensor and the handgrip pulse
sensor cannot be used at the same time.
An "E," for English miles, or
an "M," for metric kilometers,
will appear in the Speed dis-
play. Press the Speed z_
button to change the unit of
measurement.
IMPORTANT: The Calories
display should be blank. If
a "d" appears in the display,
the console is in the "demo"
mode. This mode is in-
tended to be used only
when a treadmill is dis-
played in a store. When the console is in the demo
mode, the power cord can be plugged in, the key can
be removed from the console, and the displays and in-
dicators on the console will automatically light in a pre-
set sequence, although the buttons on the console will
not operate. If a "d" appears in the Calories display
when the information mode is selected, press the
Speed _' button so the Calories display is blank.
To exit the information mode, remove the key from the
console.
22