Healthrider S700i HRTL16990 User Manual page 10

_ Press the Start button or the Speed A button
to start the walking belt.
A moment after the button is pressed, the walking
belt will begin to move at 1.0 mph. Hold the hand-
rails and begin walking.
HOW TO TURN ON TH,F- POWFR
g Plug in the power cord (see HOW TO PLUG liq
THE POWER CORD on page 7).
B Locate the on/off
switch on the front of
the treadmill near the
power cord. Move
the on/off switch to
the on position.
Position
_1 Stand on the foot
rai]s of the treadmill.
Find the clip attached
to the key and slide
the clip fully onto the
waistband of your
clothing. Next, insert
the key into the console. After a moment, the
displays, the LED track, and various indicators will
light.
Asyouexe !! ,,1
the speed of the walking _--
belt as desired by press- ---'1
ing the Speed buttons or
the Quick Speed but- SP_ED
tons. Note: After the but-
tons are pressed, it may
take a moment for the walking belt to reach the
selected speed setting.
To stop the walking belt, press either of the Stop
buttons. The displays will pause and the Time/
Segment Time display will begin to flash. To
restart the walking belt, press the Start button or
the Speed z&button. To stop the walking belt and
reset the displays, press a Stop button, remove
the key, and then reinsert the key.
Lq
To vary the intensity of
your exercise, adjust the
incline of the treadmill
by pressing the Incline
buttons. Note: After the
buttons are pressed, it
may take a moment for
Adjust the incline of the treadmill as desired.
:,o.'ct o j
the treadmill to reach the selected incline setting.
10