Backguard Installation Instructions - Haier CHER203AAWW User Manual

BACKGUARD INSTALLATION INSTRUCTIONS
Electric Ranges
1. Move the main top lk_rward. (Lift up and pull lk_rward slightly.)
2. Place the backguard on top of end panels at the rear of range. Make certain the tabs of
the burner box cover rest on the outside of the burner box flanges. (See No. 1.)
3. If backguard is equipped with electrical features, connect the corresponding black and
white wires then tuck them into the connection channel. (See No. 2.)
4. Insert machine screws through h)wer inside flange of end caps and end panels. Secure
with hex nuts provided. (See No. 3.)
5. Insert machine screws through elongated holes al bottom of backguard and side flanges
of burner box. Secure with hex nuts provided. (See No. 4.)
6. Attach wire connection channel to the main back wire cover. Use the sheet metal screw
provided. (See No. 5.)
Power Connections to Appliances
Have the range installed by a qualified service technician or an authorized servicer.
Installation must conl_rm with the National Electric Code ANSI/NFPA NO. 70-latest
edition and local electrical code requirements.
IA'-WARNING Be s ure
electric power is OFF at the fuse (breaker)box until the unit is
installed and ready to operate. See appliance rating plate for maximum
K.W. and amperage rating.
10