Timer Recording Errors/Solutions - GoVideo DVR5000 User Manual

Timer Recording Errors/Solutions
If there is a problem with your
Timer Recording, the Timer
icon will flash on the Front
Panel Display and an error
message will appear on the
On-Screen Display Once you
correct the error, the event will
begin if there is still time
remaining for that event. You
can also clear the event in the
Event Summary screen,
Tape Missing
There is no videotape in the VCR deck.
Insert a videotape in the VCR deck.
Tape Missing Tab
The videocassette is missing the Record Safety Tab.
Insert a video cassette with the Record Safety Tab intact,
or place a small piece of adhesive tape over the opening
to permit recording.
--j
RecordSafetyTab
Not Ready
The VCR deck is not in Stop mode (e.g., it is playing, rewinding,
etc.).
• Press Stop to stop the VCR deck.
Overlapping Events
Two or more events are programmed to occur at the same time:
• When you program a new event, the DVD-VCR checks all
timer events for conflicts. If two events overlap, you will be
prompted to either delete one of the events, or allow them to
overlap.
If events overlap, the first event will be completely recorded,
then the next event will start and the remainder of that event
will be recorded.
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 1[.
please review the events
from the 5elec[ Event
menu and ret_ove c_e
using the CLEAR key
RE]]JRN _o Co¢fflnue
82
DVD-VCR USER'S GUIDE