Air Video Out Setting - GoVideo DVR5000 User Manual

AIt Video Out Setting
If you connected your
D VD- VCR to your
television using the S-
Video or Component Video
Out jacks, you MUST set the
"AIt (alternative) Video Out"
selection in the on-screen
menu system.
You can ONLY watch the
DVD player through the S-
Video or Component Video
connection method. The
tuner and VCR will still be
viewed through the RF or
fine inputs.
1
Open "Setup Menu"
Press the Setup button.
i_[,la.u_:
,,z*$(,_ ilr,_r IZeccmlrl 8
Child L_k
t_Ch._
DVD _p
VC_ & Ch_lnel ,_ewp
L_Buaw_.an_ue_lor_
I'/_ To _ -p To _ea
P_TOP_ To qu_
2 Select "DVD Setup"
Using the joystick, move the selection arrow to "DVD
Setup," then push right to select.
3 Select "AIt Video Out"
Move the selection arrow to "Air Video Out," then push
right to select from the following options:
• Off - Indicates that you are using the standard RF or
Line Out jacks to connect your DVD-VCR to your TV
or display device.
• S-Video - Indicates that you are using the S-Video
Out jack on the rear panel to connect to your TV.
• Component - Indicates that you are using the
Component Video Out jacks on the rear panel to
connect to your TV.
98
DVD-VCR USER'S GUIDE