GE PSS25NGNACC Owner's Manual And Installation page 30

Installation Instructions
INSTALLING THE WATER LINE (CONT.)
IT-dTURN THE WATER ON AT THE
SHUTOFF VALVE
Tighten any connections that leak.
Replace acce,_s cover.
[] PLUG IN THE REFRIGERATOR
Arrange the coil of tnbhlg so that it does not vibrate
against tile back of the refrigerator or against the
wall. Push tile refrigerator back to the _all.
START THE ICEMAKER
Set the icemaker power switch to tile I (on) position.
The icemaker will not begin to operate undl it
reaches its operating temperature of 15°F (-9°C)
or below. It will then begin operation automaticaUy
if the icemaker power switch is in the I (OR)position.
I
NOTE: In lower water presmlre conditions, the
water _alve may turn on up to 3 times to deliver
enough water to the icemaker.
30