Table of Contents
Advertisement
Available languages
Available languages
Settings
Dishwasher
Reprogramming
Some of the machine's functions can be reprogrammed.
You can change the dishwasher's
programming
by using the keypad. The selection will be retained until the next time you reset this function.
Even if the machine is turned off at the main switch or loses power for any other reason, all selections reg-
istered before the interruption
of power will be retained.
Child-safe
button
lock
You can prevent a child starting the machine by accident or changing the settings by programming
the
machine with a button lock, which requires the Temperature
and Drying buttons to be pressed simultane-
ously to start up the machine. The button lock will automatically
be reactivated after three minutes.
1. Switch off the dishwasher with the main switch.
2. Hold in the TEHP BOOSTand HEAT DRY buttons while pressing the main switch. The
Temperature,
Drying and start symbols will flash. Release the Temperature
and Drying
buttons.
3. Press the CYCLE button - when the Auto wash symbol is lit,
the button lock has been activated.
4. Then press the START/RESET
button
to store the setting.
or Reset:
1. Switch
offthe
dishwasher
with the main switc.
2. Hold in the TENP BOOST and HEAT DRY buttons
at the same time as pressing
the main
switch
3. Press the CYCLE-
when the Auto wash symbol
goes out,
the button
lock has been deactivated
/4. Then press the START/RESET
button
to confirm
the setting.
18
Advertisement
Table of Contents
