Table of Contents
Advertisement
UNPACKING YOUR MITER SAW
PJ_i_YiJ,t3_
To avoid injury from unexpected starting or electrical
shock, do not plug the power cord into a source of power
during unpacking and assembly. This cord must remain
unplugged whenever you are working on the saw.
1.
Remove the miter saw from the carton.
IMPORTANT: Do not lift the miter saw by the switch
handle or miter table handle. It may cause
misalignment,
ALWAYS LIFT THE MACHINE BY
THE BASE HAND HOLDS.
,
3.
Place the saw on a secure stationary work surface.
Separate all parts from the packing material. Check
each one with the illustration to make certain all
items are accounted for, before discarding any
packing material.
If any part is missing or damaged, do not attempt to
assemble the miter saw, or plug in the power cord until
the missing or damaged part is correctly replaced. To
avoid electric shock, use only identical replacement parts
when servicing double insulated tools.
Hand
(both sides)
Blade wrench
Miter table handle
Extension wings
Dust bag
Advertisement
Table of Contents
