Table of Contents
Advertisement
About this Manual
This manual provides you with instructions on installing your
Transport GT20. This manual is intended for experienced users and
integrators with hardware knowledge of personal computers.
This manual consists of the following parts
Chapter 1:
Chapter 2:
Chapter 3:
Appendix:
For information on the mainboard, please refer to the attached main-
board user's manual. You can find the detailed description about
jumper and BIOS settings from the motherboard manual.
Provides an Introduction to the Transport GT20
B2865 bare-bones, packing list, describes the
external components, gives a table of key compo-
nents, and provides block diagrams of the system.
Covers procedures on installing the CPU, mem-
ory modules, an optional PCI-Express card, and
hard drives.
Covers removal and replacement procedures for
pre-installed components
Provides information on installing SMDC cards
and describes the differences between mainboard
BIOS and system BIOS. The cable connection
tables are also provided for reference of system
setup.
iii
Advertisement
Table of Contents
