Table of Contents
Advertisement
3.10
Replacing the Power Supply
3.10.1 Replace the power supply
To replace the power supply follow these instructions.
1.
Press the tab as shown in the diagram and pull out the power.
2.
Free the power from the power socket.
You can refer to Chapter 2.1.2 for the above steps.
3.
Replace a new single power (FRU NO.: CPSU-0350) and
reinsert it into the power socket following the above steps in
reverse.
3.10.2 Replace the power board M1029
1. Disconnect all the cables connect to M1029.
Chapter 3: Replacing Preinstalled Components
67
Advertisement
Table of Contents
