GE GTH18FBC2RWW Owner's Manual And Installation Instructions page 4

Aboutthe temperature controldial.
Turning the dial to Off stops cooling in both compartments--fresh food and freezer. It does not shut off power to the refrigerator.
Temperature Control Dial
The temperature dial adjusts refrigerator from warmest to coldest.
See illustrations below %r temperature setting in%rmation.
Recommened
factory setting Coldest setting Warmest setting
Aboutthe fresh food compartmentshelves.
Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.
[=T-]Tiltup
Half-Width Shelves
One end of tile shelf rests on a molded side-
wal] support; a bracket on tile odler end hoolcs
into a track on tile rear cabinet walJ.
To
remove, lift the shelf up at front, then off
the support and out of the track.
To replace,
select desired shelf height, l\Tith
shelf front raised slig'hrl}; hook the bra&et's top
lug into the track, then lower the shelf onto the
support.
NOTE:Theshelfto the rightofthetrackis designed
to hookintothe right-hand slot;the shelfto the left
is designed to hookintothe left-hand slot.
Pullforward
To remove the full-width shelves
Full-Width Shelves
Some models have a steel wire sliding shelf, a
stationary telnpered glass shelf,
a spillproof shelf or two steel wire stationary
shelves. These shelves call be moved to
another place ill the fresh food
COlnpartment.
The full-width sliding shelf has stop-locks.
When placed correctly on the shelf supports,
the shelf will stop before coming completely
out of the refrigerator and will not tilt when
you place food on it or remove food from it.
Liftr
Pull forwardanddown
Toremove afull-width shelf when
the fresh food compartmentdoor
cannot be opened fully
About the freeze corn artment shelves.
Step Shelf ion somemodels)
To remove the step shelf:
Z] Lift left side of shelf slightly.
--] ove shelf to the left to free its right ends
from holes ill the cabinet w_dl.
[_] Lower right side of shelf, move shelf to the
right and take it out.
To replace the stepshelf:
[_ With shelf tilted as sho_s_, fit left ends of
shelf into holes ill cabinet wall.
-] ift left side of shelf slighd?; swing shelf up,
fit right ends of shelf into holes ill cabinet
wall, and lower shelf into place.
4