GE GTH18FBC2RWW Owner's Manual And Installation Instructions page 12

Installation instructions
REVERSING THE DOOR SWING (CONT.)
[_ REMOVE THE FRESH FOOD DOOR
3.1 Tape the door shut with masking tape.
3.2 [sing a 5/] 6" hex-head socket screwdriver and a
5/16" open-end wrench, remove the two screws
holding the center hinge to the cabinet. Lift the
center hinge to free its pin from the socket in the top
of the door, and set hinge and screws aside. Be
careful not to lose fl_e center hinge spacer and washer.
3.3 Remove d_e tape and tilt d_e door away from d_e
cabinet. Lift the door from d_e pin in d_e bottom hinge
bracket. [If d_e plastic washer sticks to d_e door bottom,
put it back on the hinge.)
3.4 Set the door outside-up on a non-scratching surface.
REMOVE THE FRESH FOOD DOOR (CONT.}
3.5 Transfer the t_vo screws from the opposite side of the
cabinet to the screw holes vacated by the center hinge
rellloval.
3.6 Transfer the washer (if your model has one) to the
opposite side. /
3.7 Take one of d_e screws removed in step 2 and start
it in the oumrmost screw hole on the opposite side. Do not
drive it _dlthe way down leave enough space under the
screw head fi)r thiclmess of the bracket.
I/
REVERSING THE HARDWARE
4.1 Move the bottom hinge bracket and plastic washer fi'om the
right side to the left side.
Plastic
-'_ I., __1 Washer
Switchthe hingepin to the ®_¢"I _r_
oppositesideof the bracket.
11_[___2_
Hinge_
'_
Bracket
12