GE GSC23LGRDBB Owner's Manual And Installation page 7

About the shelves and bins. ge com
Not all features are on all models.
Refrigerator bin
Freezer bin
Freezer tilt-out bin
Refrigerator Door Bins and Freezer Door Tilt-Out Bins
LargeBins
The larger reflige_v_tor door bins and
fleezer flit-out door bins are adjustable.
Toremove: L ift the fiont of the bin straight
up, then lift up and out.
Toreplaceor relocate:Engage file back side
of the bin in file molded supports of the
dooL Then push down on the flont of the
bin. Bin will lock in place.
SmallBins
To
remove: I,ift the flont of the bin straight
up then out.
Toreplace:Position the bin above file
rectangular molded supports on the dooL
Then slide the bin down Ohm the support
m lock it in place.
Thesnugger helps prevent dpping, spilling
or sliding of small items stored on the door
shelf. Place a finger on either side of the
snugger near the rear and move it back
and forth to fit your needs.
Do not block
CAUTION: O n
models with an ice
chuteinsidethetop
freezer doorbin,be
carefulwhenp/acing
itemsin thebin.
Makesurethat
itemsdo notblock
or fall into theice
chute.
Press tab and pull shelf
forward to remove
Slide-Out Spillproof Shelf
The slide-out spillproof shelf allows you
m reach imms stored behind others. The
special edges are designed m help prevent
spills from dripping to lower sheNes.
Toremove:
Slide the shelf out until it reaches the stop,
then press down on the tab and slide the
shelf suaight out.
To replaceor relocate:
IJne the shelf up Mill file supports and
slide it into place. The shelf can be
reposidoned when the door is at 90 ° or
more. To reposidon the shelf, slide the shelf
past the stops and angle downward. Slide
shelf down m the desired position, line up
with the supports and slide into place.
Makesureyoupush theshelvesall the way back
in beforeyou dose the door.
7