Advertisement
Effect Types and Parameters
StompDly
By turning the feedback up on this stomp-style delay, you can make it self-oscillate.
Page01
Page02
Page03
HD Hall
This is a dense hall reverb.
Page01
Page02
Hall
This reverb effect simulates the acoustics of a concert hall.
Page01
Page02
This reverb effect simulates the acoustics of a room.
Room
Page01
Page02
Spring
This reverb effect simulates a spring reverb.
Page01
Page02
Knob1
E.LVL
0–120
Adjusts amount of effect sound
mixed with original sound.
Sync
OFF , – x8
Activates tempo sync.
HiDMP
0–10
Adjusts the treble attenuation of the
delay sound.
Knob1
PreD
1–200
Adjusts the delay between input of
the original sound and start of the
reverb sound.
LoDMP
0–100
Adjusts low frequency damping in
reverb sound.
Knob1
Decay
1–30
Sets the duration of the reverberations. Adjusts the tone.
PreD
1–100
Adjusts the delay between input of the
original sound and start of the reverb sound.
Knob1
Decay
1–30
Sets the duration of the reverberations. Adjusts the tone.
PreD
1–100
Adjusts the delay between input of the
original sound and start of the reverb sound.
Knob1
Decay
1–30
Sets the duration of the reverberations. Adjusts the tone.
PreD
1–100
Adjusts the delay between input of the
original sound and start of the reverb sound.
Knob2
F .B
0–100
Adjusts the feedback amount.
Mode
MONO, STR
Sets output to mono or stereo (STR).
When stereo, effect sound is output
from L channel and unchanged input
sound is output from R channel.
Knob2
Decay
0–100
Sets the duration of the reverberations.
HiDMP
0–100
Adjusts high frequency damping in
reverb sound.
Knob2
Tone
0–10
Level
0–150
Adjusts the output level.
Knob2
Tone
0–10
Level
0–150
Adjusts the output level.
Knob2
Tone
0–10
Level
0–150
Adjusts the output level.
10
Knob3
Time
1–600
Sets the delay time.
Tail
OFF/ON
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Knob3
Mix
0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Tail
OFF/ON
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Knob3
Mix
0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Tail
OFF/ON
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Knob3
Mix
0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Tail
OFF/ON
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Knob3
Mix
0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Tail
OFF/ON
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Advertisement
