Advertisement
Effect Types and Parameters
[MOD/SFX]
Tremolo
This effect varies the volume at a regular rate.
Page01
Page02
Phaser
This effect adds a phasing variation to the sound.
Page01
Page02
TheVibe
This vibe sound features unique undulations.
Page01
Page02
Chorus
This effect mixes a shifted pitch with the original sound to add movement and thickness.
Page01
Page02
By mixing an effect sound that is slightly pitch-shifted with the original sound, this effect
Detune
type has a chorus effect without much sense of modulation.
Page01
Page02
This is a stereo chorus with a clear tone.
StereoCho
Page01
Page02
This models the sound of a BOSS CH-1 SUPER CHORUS.
SuperCho
Page01
Page02
Knob1
Depth
0–100
Adjust the depth of the modulation.
UP 0–UP 9,
Wave
DWN 0–DWN 9,
TRI 0–TRI 9
Sets the modulation waveform.
Knob1
Rate
1–50
Sets the speed of the modulation.
Knob1
Speed
0–50
Sets modulation speed.
Wave
0–100
Adjusts modulation waveform.
Knob1
Depth
0–100
Sets the depth of the modulation.
Tone
0–10
Adjusts the tone.
Knob1
Cent
-25–25
Adjusts the detuning in cents, which
are fine increments of 1/100-semitone.
Tone
0–10
Adjusts the tone.
Knob1
Depth
0–100
Sets the depth of the modulation.
Tone
0–10
Adjusts the tone.
Knob1
E.LVL
0–120
Adjusts amount of effect sound
mixed with original sound.
EQ
0–100
Adjusts effect tone.
Knob2
Rate
0–50
Adjusts the rate of the modulation.
Knob2
4 STG, 8 STG,
Color
inv 4, inv 8
Sets the tone of the effect type.
Knob2
Depth
0–100
Sets the depth of the modulation.
Mode
VIBRT, CHORS
Sets effect to vibrato or chorus.
Knob2
Rate
1–50
Sets the speed of the modulation.
Level
0–150
Adjusts the output level.
Knob2
PreD
0–50
Sets the pre-delay time of the effect
sound.
Level
0–150
Adjusts the output level.
Knob2
Rate
1–50
Sets the speed of the modulation.
Level
0–150
Adjusts the output level.
Knob2
0–100
Sets the speed of the modulation.
Sets output to mono or stereo (STR).
When stereo, effect sound is output
from L channel and unchanged input
sound is output from R channel.
7
Knob3
Level
0–150
Adjusts the output level.
Knob3
Level
0–150
Adjusts the output level.
Knob3
Bias
0–100
Adjusts bias of waveform modulation.
Level
0–150
Adjusts the output level.
Knob3
Mix
0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Knob3
Mix
0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Knob3
Mix
0–100
Adjusts the amount of effected sound
that is mixed with the original sound.
Knob3
0–100
Adjust the depth of the modulation.
Advertisement
