Making/Changing Drive Module Settings - Zoom 606 Guitar Operation Manual

Making/Changing DRIVE Module Settings

The DRIVE module comprises various distortion types and gain
settings, which can be adjusted with the dedicated selector and keys at
any time.
The following operation can be carried out in play mode or edit
mode.
Select the DRIVE module
distortion type
Use the DRIVE
selector to select the
desired distortion
type (effect type).
The selected effect type
name is shown for about
2 seconds on the display.
For a detailed list of
effect types, see the
section "Effect
Parameters" at the end of
this manual.
F d F F d
By setting the
PLAY/EDIT selector
to the DRIVE
position, you can
check the current
effect type.
When the DRIVE LED is out, the DRIVE module is off.
NOTE
If you switch to a different effect type in this
condition, the module is automatically turned on.
14 ZOOM 606
GUITAR
Making/Changing DRIVE Module Settings
Adjust the DRIVE
module gain
Press one of the GAIN [+] / [-] keys.
Depending on which effect type is
currently selected, distortion depth or
signal gain changes. The GAIN
parameter value is shown for about 2
seconds on the display.
2 6 2 6
To switch the
DRIVE module
on or off
Press the GAIN [+] / [-] keys
together.
When the DRIVE module is
switched off, the DRIVE LED at the
top right of the DRIVE selector goes
out.
The change made in this way is
only temporary. When you select
a different patch, the setting will
revert to the original condition. If
you want to keep the change,
store the patch, as described on
page 18.
ZOOM 606 15
GUITAR