Effect Types And Parameters; Booster Module; Isolator/Comp (Isolator/Compressor) Module; Drive Module - Zoom 707II Guitar Operation Manual

Effect Types and Parameters

In this section, all effect types and parameters of the modules in the 707II are explained.
The symbol indicates a parameter that is assigned to the expression pedal and can be
changed by moving the pedal (
can be controlled by parameter knobs 1 – 3 in play mode.

BOOSTER Module

This module amplifies the input signal. The amount of boost can be set to Low (1) or High (2).
TYPE 1 BOOSTER

ISOLATOR/COMP (Isolator/Compressor) Module

The isolator allows cutting or emphasizing a particular band. The compressor serves to reduce excessive signal levels.
TYPE 1
COMP (Compressor)
Universal type compressor that controls attack rate in
two stages.
ATTACK(FAST/SLOW)
Parameter 1
Adjusts time interval from signal onset to start of
compression.
SENS
Parameter 2
Adjusts compressor sensitivity.
LEVEL
Parameter 3
Adjusts signal level after passing module.
TYPE 2
ISOLTR (Isolator)
Isolator that allows cutting or emphasizing a particular
band. There are two pages with parameters. Use the
[EDIT] key to switch between pages.

DRIVE Module

This module comprises 30 types of distortion and acoustic simulator effects. The [DRIVE] knob allows choosing the
amplifier or compact effect type, and the [DRIVE VARIATION] key allows choosing the tone or distortion variation.
TYPE 1
FDR
CLASSIC FD BLU
Classic bluesy sound of a built-in tube amp
STANDARD FD CLN
Clean sound of a built-in tube amp
MODERN FD DRV
Drive sound of a built-in tube amp
TYPE 2
MS
CLASSIC MS OLD
Old-style sound of a British tube stack amp
STANDARD MS CRU
Crunch sound of a British tube stack amp
MODERN MS DRV
Drive sound of a British tube stack amp
→
p. 23). The symbols
Parameter 1
Selects boost setting.
■ PAGE 1
Parameter 1
Adjusts high-range mix.
Parameter 2
FS, SL
Adjusts midrange mix.
Parameter 3
0 – 10
Adjusts low-range mix.
■ PAGE 2
1 – 8
Parameter 1
Adjusts crossover frequency for low and mid range.
Parameter 2
Adjusts crossover frequency for mid and high range.
Parameter 3
Adjusts signal level after passing module.
TYPE 3
CLASSIC
Old-style sound of a tube combo amp with gutsy
midrange
STANDARD
Drive sound of a tube stack amp with gutsy midrange
MODERN
Metal sound of a tube stack amp with gutsy midrange
TYPE 4
CLASSIC
Old-style crunch sound
STANDARD
Clean and bright combo amp sound
MODERN
Warm and powerful combo amp sound
– indicate the parameters that
GAIN
HIGH
MID
LOW
FREQ L
(5=50Hz, 8.0=8kHz, 0.0=10kHz)
FREQ H
LEVEL
BG
BG OLD
BG DRV
BG MTL
CLEAN
VX CRU
JAZZ C
MACH
ZOOM 707II GUITAR
1, 2
OFF, 12 – 12
OFF, 12 – 12
OFF, 12 – 12
5 – 8.0, 0.0
5 – 8.0, 0.0
1 – 8
33