Yamaha FJR13AEY Owner's Manual page 23

G
a fuel reserve tripmeter (which
shows the distance traveled on the
fuel reserve)
G a clock
G a fuel meter
G
a coolant temperature meter
G
a transmission gear display
G
an ambient temperature display
G
a fuel consumption display (instan-
taneous and average consumption
functions)
G
a self-diagnosis device
TIP
Be sure to turn the key to "ON" before
using the select and reset buttons.
INSTRUMENT AND CONTROL FUNCTIONS
Odometer and tripmeter modes
1. Odometer/tripmeter/fuel reserve tripmeter
2. Select button
3. Reset button
Pushing the select button switches the
display between the odometer mode
"ODO" and the tripmeter modes "Trip 1"
and "Trip 2" in the following order:
ODO → Trip 1 → Trip 2 → ODO
TIP
When selecting "Trip 1" or "Trip 2", the
display flashes for five seconds.
When approximately 5.5 L (1.45 US
gal, 1.21 Imp.gal) of fuel remains in the
fuel tank, the display will automatically
change to the fuel reserve tripmeter
mode "Trip F" and start counting the
distance traveled from that point. In that
4-6
case, pushing the select button switch-
es the display between the various trip-
meter and odometer modes in the
following order:
Trip F → ODO → Trip 1 → Trip 2 → Trip
F
TIP
When selecting "Trip 1", "Trip 2" or "Trip
F", the display flashes for five seconds.
To reset a tripmeter, select it by push-
ing the select button, and then push the
select button for at least one second
while the display is flashing. If you do
not reset the fuel reserve tripmeter
manually, it will reset itself automatical-
ly and the display will return to the prior
mode after refueling and traveling 5 km
(3 mi).
4