Connect Aw5000 To Your Home Wi-Fi Network; Option 1: Set Up Wireless Connection To A Non-Wps Router Through An Ios Device - Philips AW5000 User Manual

4 Connect
AW5000 to
your home Wi-
Fi network
To connect AW5000 to your existing home Wi-
Fi network, you need to apply your home Wi-Fi
settings to AW5000.
Choose your best setup method based on the
preconditions listed below.
Platform of Type of
your mobile your Wi-
device Fi router
iOS Non-WPS No
Android Non-WPS No
Either iOS WPS
or Android
Either iOS Either
or Android non-WPS
or WPS
Before connection of AW5000 to your home
Wi-Fi network, make sure that:
a your Wi-Fi router is powered on and
working properly.
b AW5000 has been powered on and
booted up successfully.
c you have jotted down your Wi-Fi
password.
Once connected successfully, AW5000 will
remember your home Wi-Fi settings. Then
you can play music or listen to Internet radio
via Philips AirStudio whenever AW5000 is
powered on and connected to your home Wi-
Fi network automatically.
Other Setup
require- method
ment
Choose
option 1.
Choose
option 2.
No Choose
option 3.
You Choose
have an option 4.
Ethernet
cable.
Option 1: Set up wireless
connection to a non-WPS
router through an iOS device
1
Before setup, make sure that your iOS
device is connected to your home Wi-Fi
network.
2
Read the Wi-Fi setup instructions on the
app.
3
As instructed, briefly press WI-FI SETUP
on the back of AW5000.
» The power/status indicator starts to
blink amber and white alternately.
» A new Wi-Fi network created by
AW5000 will appear, with the network
name (SSID) of Philips_Install.
WiFi SETUP
< 3S
< 30S
EN 9