Download Print this page

Philips HTL3120 User Manual

With integrated 120w subwoofer and bluetooth
Hide thumbs


Quick Links

Always there to help you
Register your product and get support at

User manual




  Summary of Contents for Philips HTL3120

  • Page 1: User Manual

    Always there to help you Register your product and get support at HTL3120 Question? Question? Contact Contact Philips Philips User manual...
  • Page 3: Table Of Contents

    Contents 1 Important Safety Mains fuse Care for your product Care of the environment Compliance Help and support 2 Your SoundBar Main unit Remote control Connectors 3 Connect and set up Connect to TV Connect digital devices through HDMI Connect audio from TV and other devices Set up EasyLink (HDMI-CEC control) 4 Use your SoundBar...
  • Page 4: Important

    • Remove batteries if they are exhausted or immediately. Contact Philips Consumer if the remote control is not to be used for Care to have the product checked before a long time.
  • Page 5: Mains Fuse

    Care of the environment This product complies with the radio interference requirements of the European Community. Hereby, Philips Consumer Lifestyle, declares that this product is in compliance with the essential Your product is designed and manufactured requirements and other relevant provisions of with high quality materials and components, Directive 1999/5/EC.
  • Page 6: Help And Support

    Congratulations on your purchase, and our website at to: welcome to Philips! To fully benefit from • download the user manual and the quick the support that Philips offers, register your start guide SoundBar at • watch video tutorials (available only for selected models) •...
  • Page 7: Night Mode

    c HDMI 1 Switch your source to the HDMI IN 1 connection. d OPTICAL Switch your audio source to the optical connection. e AUDIO-IN Switch your audio source to the MP3 connection (3.5mm jack). Bluetooth Switch to Bluetooth mode. (Repeat) Select or turn off repeat/shuffle mode in USB mode.
  • Page 8: Connectors

    (USB) • In HDMI in mode (connected via HDMI IN 1 or HDMI IN 2), press and Audio input from a USB storage device. hold to switch audio output from the Soundbar speaker or TV speaker. Rear connectors (Play/Pause) • Start, pause or resume play in USB mode and Bluetooth mode (only for AVRCP-supported Bluetooth devices).
  • Page 9: Connect And Set Up

    3 Connect and set SoundBar to the HDMI ARC connector on the TV. • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual. On your TV, turn on HDMI-CEC This section helps you connect your SoundBar operations.
  • Page 10: Connect Audio From Tv And Other Devices

    OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the TV or other device. • The digital optical connector might be labeled SPDIF or SPDIF OUT. Set up EasyLink (HDMI-CEC control) Your SoundBar supports Philips EasyLink, which uses the HDMI-CEC (Consumer Electronics...
  • Page 11: Use Your Soundbar

    For information on your device, see the user manual of the device. • Before you start Philips does not guarantee 100% interoperability with all HDMI-CEC devices. • Make the necessary connections described in the quick start guide and the user manual.
  • Page 12: Mp3 Player

    • HIGH: Spice up your dull movies and Night mode music with added sound effects. • CLEAr: Hear every detail in your music For quiet listening, decrease the volume of loud and clear voices in your movies. sounds when audio is played. Night mode is • dEEP: Experience spoken words and only available for Dolby Digital soundtracks.
  • Page 13: Play Audio Through Bluetooth

    Bluetooth version as 3.0 + EDR. Bluetooth device. • • The operational range between the Philips does not guarantee 100% compatibility with all Bluetooth devices. SoundBar and a Bluetooth device is approximately 10 meters (30 feet). Bluetooth on the remote control...
  • Page 14: Apply Factory Settings

    You can reset your SoundBar to the default in accident, injury or damage. If you have any query, settings programmed at the factory. contact Philips Consumer Care in your country. • In AUX mode, within three seconds, press Before wall mounting, make sure the wall can support the weight of your SoundBar.
  • Page 15: Product Specifications

    6 Product • WMA: V7, V8, V9 specifications Bluetooth • Bluetooth profiles: A2DP, AVRCP • Bluetooth version: 3.0 + EDR Main unit Note • Specifications and design are subject to change without • Power supply: 110-240 V~, 50/60 Hz notice. • Power consumption: 25 W • Standby power consumption: ≤ 0.5 W •...
  • Page 16: Troubleshooting

    Bluetooth device. Disconnect the If you still have a problem, get support at www. connected device, then try again. Quality of audio play from a connected Main unit Bluetooth device is poor.
  • Page 17 Année/mois (aaaa/mm) au cours de laquelle le marquage CE a été apposé) EUROPEAN DECLARATION OF CONFORMITY (DECLARATION DE CONFORMITE CE) We / Nous, PHILIPS CONSUMER LIFESTYLE B.V. (Company name / Nom de l’entreprise) TUSSENDIEPEN 4, 9206 AD DRACHTEN, THE NETHERLANDS (address / adresse) declare under our responsibility that the product(s): (déclarons sous notre propre responsabilité...
  • Page 18 Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. HTL3120_12_UM_V3.0...